D&Z INDUSTRIES CO.,LIMITED
gifts
Add to Cart
our companies' website
Product Introduction:
Power Light:
1. Insert the charger or USB line of the computer for charging:
1) In case it is not fully charged, the four power lights will blink in circulation to indicate the charging status.
2) When the battery is fully charged, the four power lights will stay on.
2. Low voltage: When the electric quantity is lower than 3.60V, the last power light will blink fast. When it is
lower than 3.45V, the device will be shut down.
3. If the device cannot start after turning on the power switch, please charge it first. When the electric quantity
reaches the standard voltage for starting up, the device will automatically start up, and you can press any buttons. When the Bluetooth indicator light is on, it indicates that the machine has started.
4 In case of no charge state, the power light will be on for 5 seconds, and then dims. The power light will be on
by pressing any buttons.
5. Dormant state. When the Bluetooth is not connected or it has been connected but is not having a call or playing music,the device will enter to power-saving mode automatically. When there is an incoming call or the music of the Bluetooth is played, reconnection can be achieved by pressing any buttons.
Bluetooth Indicator Light:
1. Not connected: the red and blue indicator lights will blink in turn. The light will be off after 5 seconds. The
Bluetooth indicator light will be on by pressing any buttons.
2. Connected: The blue light stays on, and the red light is off.
Button Description:
1. Flashlight button: The flashlight can be turned on and turned off by pressing the buttons of it in starting-up condition.
2. Volume up / down button: The volume will be up / down by long-term pressing. The previous song / the next song can be switched by short-term pressing.
3. Pause / Play button: In the state of no incoming calls or calling, it is taken as the pause / play button. In the state of an incoming call or calling:
1) An incoming call: Pick up the phone by short-term pressing, and hang up the phone by long-term pressing.
2) In the calling state, hang up the phone by short-term pressing, invalid for long-term pressing.
Note: In case the same mobile phone needs to be connected to the device, the previous connected device shall be neglected with re-pairing and reconnection (As the name of the devices is the same, and the ID of each machine is different).
4.Volume up / down and push button three seconds to switch the language(English or chinese)
Electrical parameters:
Rechargeable lithium battery of 2000 mA volume loop
Power: 1.0W
Frequency response: 100HZ-20KHZ
SNR: ≥ 75db
MicUSB Input: 5V/800MA
External charging of USB output: 5V/1A
Horn: 3W/4Ω Diameter: 30mm
Contact me:
Skype: lynne.wu1991
QQ: 2858452965
E-mail: lynne@dawningchina.com
Mobilephone: 18758321704
Pictures:
Remarks:
This product cannot be put in high temperature environment, and it shall be kept away from open flame.
This product cannot be placed in water, and it cannot accept normal external pressure.
After the power is fully charged, do remove the charger. Long-term charging for the device is prohibited.
If the product still cannot work normally after charging, please contact the supplier by the telephone on the packing box.